Crank Brothers Multi-5 Tool

Features
weight 85g
length 3.5" / 89mm
frame 6061-T6 aluminum
tools 6051 high tensile steel
chain tool not included
spoke wrench not included
hex wrenches #3, 4, 5, 6
screwdrivers phillips
open wrench none
torx none
warranty lifetime

Crank Brothers Multi-10 Tool

Features
weight 124g
length 3.5" / 89mm
frame 6061-T6 aluminum
tools 6051 high tensile steel
chain tool not included
spoke wrench not included
hex wrenches #2, 2.5, 3, 4, 5, 6, 8
screwdrivers phillips, flat
open wrench none
torx t-25
warranty lifetime

Crank Brothers Power Pump Alloy

weight 173g
length 9.3" / 238mm
material 6061-T6 aluminum barrels
pressure 130psi / 9bar
air switch high volume / high pressure
color natural or black
mounting bracket included
patch kit not included
warranty lifetime

Crank Brothers Power Pump Pro

weight 120g
length 6.9" / 175mm
material 6061-T6 aluminum barrels
pressure 115psi / 8bar
air switch high volume / high pressure
color natural or black
mounting bracket not included
patch kit not included
warranty lifetime

Crank Brothers Power Pump Ultra

weight 118g
length 6.9" / 175mm
material 6061-T6 aluminum
pressure 115psi / 8bar
air switch high volume / high pressure
color natural or black
mounting bracket not included
patch kit not included
warranty lifetime

Tri Flow Superior Lubricant 12oz Aerosol

Superior Lubricant Aerosol
Tri-Flow Superior Lubricant provides twice the lubricating power of most competitive brands. Its light viscosity allows for deep penetration into hard to reach moving parts. High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity. Formulated solvents soften and remove dirt and contaminants, while special additives displace moisture and prevent rust and corrosion.

USAGE:
• Ideal for loosening rusted and
corroded nuts and bolts
• Excellent for lubricating chains
and all pivot points

RECOMMENDED CONDITIONS:
• Ideal for all conditions -
wet, dry, road and trail

Tri Flow Citrus Cleaner Degreaser 14oz Aerosol

Citrus Cleaner/Degreaser
Quickly clean and degrease even the dirtiest drivetrains with Tri-Flow Citrus Cleaner/Degreaser. Its high velocity, precision valve blasts dirt and debris while the powerful foaming action loosens grease, oil and hardened deposits, leaving surfaces clean and residue free. Designed with the environment in mind, this water-soluble, biodegradable, citrus-based formula can easily be rinsed with water.

USAGE:
• Best for cleaning mounted drivetrains
• Great for soaking gunked up parts and tools
• Ideal for use with parts washers
• Excellent for use with chain cleaners

Topeak Mini Master Blaster

Small in size and price, huge in results! That's the Mini Master Blaster DX by Topeak. Its durable metal construction and comfortable padded elastomer handle make pumping easy and sure. It also sports a thumblock head that fits Presta and Schrader valves.

Features and Information
Size: 9.1 x 1.85 x 1.26 inches

Weight: 150 grams

Topeak Mountain Morph Pump

Light-weight but powerful, The Mountain Morph features a T-Handle, fold-down foot pad and flexible hose that turns this frame pump into a trail-side floor pump. If youre looking for the smoothest action frame pump for the dirt, the Mountain Morph will be your choice.

Folding foot support and flexible hose easily convert frame pump into a trail-side floor pump.
Aluminum barrel for long pump life. Inflates to 120 psi with ease.
Padded T-handle provides a comfortable hand position while inflating.
Quickly converts between Presta & Schrader valves.
Equipped with adjustable quick release clamp for multi-position frame mount.

Size(LxWxH): 12.7x2.3x1.22
Weight: 228 grams w/gauge, Clip Wt: 25 grams

Topeak Road Morph Pump

Similar to it sibling the Mountain Morph the Road Morph is a light-weight road frame pump that morphs to a mini-floor pump. Its floor pump-like action makes filling up those high-pressure road tires a breeze.

Folding foot support and flexible hose easily convert frame pump into a road-side floor pump.
Aluminum barrel for long pump life .
Inflates to 160 psi with ease.
Padded T-handle provides a comfortable hand position while inflating.
Quickly converts between Presta & Schrader valves .
Equipped with clamp mount for multi-position frame mounting.

Size(LxWxH): 12.7x2.26x 1.1
Weight: 270 grams w/gauge, Clip Wt: 25 grams

Finish Line Chain Cleaning Kit

Quick, efficient and easy to use. No removal of your bicycle chain necessary! The Shop Quality Chain Cleaner features 3-Brush rotating brush design and scrubber pads for fast, thorough cleaning. Clips onto chain and in just 60 seconds, your chain is clean.

Heavy-Duty industrial quality resin body withstands shop use and will not crack when dropped off a work bench. An oversized super strong magnet at the bottom collects metal filings from the chain, ("You will be Amazed") A new 30Β° Exit Angle and industrial quality foam sponge eliminate dripping. Plus a new easy-close clamp & Ergo-handle all add up to make this the best chain cleaner yet!

The Finish Line Chain Cleaner has been the best selling of chain cleaners for over 8 years. Its 3-Brush design is what makes it clean so fast and through like no other cleaner on the market the brushes rotate with the chain, each bristle tuft cleaning inside each chain link. Then the scrubber pads clean the outside of the chain yet again and wipe the fluid and grime from the chain routing it to the bottom of the cleaner. The magnet strips away and holds wear particles at the bottom of the unit. This Chain Cleaner will make you wonder why you ever suffered along with a dirty, grindy, messy chain its that easy to use!

Finish Line Grunge Brush

Chain and gear cleaning has never been faster or easier! Scrub the chain with the compact bristles of The Grunge Brush to clean all four sides of a chain. Use the long bristled end to clean other components like sprockets, derailleurs, crankset, brakes and pedals. Regular component cleaning prevents premature wear and tear on chain and sprockets, eliminates chain skipping caused by dirt and grunge, and assures smooth operation of drive train and brakes.

Park CN-10 Pro Cable/House Cutter

The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. The CN-10 has cold forged, heat treated steel handles for strength and precision ground cutting jaws for a clean cut on every cable. Dual density molded grips are specially contoured for superior comfort and control. The CN-10 has a built in crimper for cable end caps and a forming hole for reforming housing ends and housing ferrules. A wire latch holds the handles together when not in use.
Packaged carded: CN-10C

Park CT-5 Chain Tool

This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special “V”- shaped handle, and super strong replaceable pin make chain removal and installation a breeze. The CT-5 works on any derailleur chain and has a “shelf” for loosening tight links. At only 77 grams, its the perfect take-along chain tool. 10-speed chain compatible.
NOTE: The CT-5 now uses the CTP replacement pin.

Packaged carded: CT-5C

Weight: 2.6 ozs. (72.8 g)

Park MTB-3 Rescue Tool

The MTB-3 Rescue Tool is a premium quality multi-tool with the design and innovative features youd expect from the top name in bicycle tools. Small and light enough to slip into a pocket or seat pack, the MTB-3 contains 22 tools, each carefully selected for nearly any repair on the road or trail. Manufactured to the highest standards, all tools are finely polished stainless steel or nickel plated steel. Unique three-piece design (patent # 6,622,329) makes each tool easy to access and easy to use. Super tough nylon handles provide excellent grip when using tools. Includes nylon carrying case with embroidered Park Tool logo. Tools included:
Chain tool
Tire levers (2)
Phillips head screwdriver
Straight blade screwdriver
T25 star-shaped driver
1.5, 2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches
8, 9, and 10mm box end wrenches
Bottle opener
0.127", 0.130", & 0.136" spoke wrenches
Pedal wrench
Serrated knife

Packaged carded: MTB-3

Weight: 12.1 ozs. (339 g)